Then finally, your LTSP session will start (Figure 3). You should see your desktop receive an IP address from your DHCP server, a large stream of dots when the boot image downloads from the TFTP server and then a regular boot splash screen from your distro. Reboot one of your desktops and select network boot. If everything goes well, your LTSP environment is ready to boot network clients.
TIGERVNC NO MATCHING SECURITY TYPES UBUNTU SOFTWARE
In addition, most Linux/BSD-based firewall software appliances, such as pfsense and endianFW, have options for this on their DHCP configuration screens. If you're unlucky and you have to set this up with a Windows server, as an administrator, open the DHCP configuration screen and add the configuration options below: 017 Root Path: /opt/ltsp/i386 066 Boot Server Host Name: 067 Bootfile Name: ltsp/i386/pxelinux.0
Add the following lines, and restart the DHCP service afterward: option tftp-server-name "" option bootfile-name "/ltsp/i386/pxelinux.0" If you are lucky and your DHCP server is a nice Linux box, edit your /etc/nf file to point your network boot options to the LTSP box. While it builds, you will see a text progress bar-get used to it, because you will need to rebuild this image several times. Once you finish the LTSP install, log on to your server and build the LTSP image with the following command: $ sudo ltsp-build-client You may use this setting if you like, but if you already have a DHCP server in your environment, you can use it. The error occurs because the installer defaults to using a second Ethernet card dedicated to boot terminals.
0 kommentar(er)
